HomeProduct SearchSite MapCheckout
Eureka Power Pak-E2 - - 18amp/hour

Search by Keyword

Eureka Power Pak-E2 - - 18amp/hour

Eureka Power Pak-E2 - - 18amp/hour
Click to enlarge image(s)
The Eureka E! Power Pak2 #2660524-6 , Delivers 18amperes per hour of electrical power for your accessories.
Weighs 14.25 lbs.
Product Dimensions 12.5"H x 8.0"W x 11.6"D

The E! Power Pak2 is safe, durable, and easy to use. Just charge, plug, and power. Charge the E! Power Pak2 before your camping trip. Plug it into your shelter's factory-installed E! Power wiring system, and power your favorite 12-volt accessories using any of your shelters built-in outlets.
WANT MUCH LONGER PERIODS OF JUICE ! YOU NEED SOLOR POWER !, Ask us about PowerFilm Solor Chargers !
NOTE:
Run times are dependent upon the accessory !
Portable power x2 for longer run time and accessories that demand more juice.
18ah battery provides 2.57 times increase in capacity
12v DC port
Comes with 16 ft Cord
Fully automatic charging
Battery status LED display
Recharge from AC wall outlet at home; or grounded extension cord in the field

GENERAL FEATURES
Compact & lightweight, the E! Power Pak2 has a low center of gravity, so it won't tip over.
Convenient, built-in charger for automatic charging of internal battery.
Just connect an extension cord to the plug to recharge internal battery on 120v outlet.
Stores up to three months without charging, and in any position.
Sure-grip handle for easy carrying.
Durable, rust and corrosion-proof polypropylene case resists fuels and solvents.
Easy-to-read battery status LEDs indicate when internal battery is at full power, 75% charged or 50% or less and needs recharging.
'Charging' and 'Charged' LEDs indicate charging status of internal battery.

12-volt cigarette lighter outlet, with rubber safety cover features resettable overload and short circuit protection for 12-volt accessories.
E! PowerPak2 harness plugs into this outlet, powering your N-Ergy tent, screen house or canopy.

SPECIFICATIONS
Weight: 14.25 lbs.
Size: 12.5"H x 8.0"W x 11.6"D

NOTE:
1. The Eureka- E Power Pak2 requires an initial overnight charge prior to first use. Use a 120 volt AC source.
2. Approximate recharge time with 12v Adapter Cord, in a running car, is 2 hours.
3. Approximate recharge time using an extension cord in a 120v AC outlet is 12 hours.

To maintain capacity and prolong the life of the Eureka Power Pak-E2, it is highly recommended that recharging after each use be done and recharging a minimum of every 3 months - more often in warm summer months when not in regular service.
WANT MUCH LONGER PERIODS OF JUICE ! YOU NEED SOLOR POWER !, Ask us about PowerFilm Solor Chargers !
NorKraine Resources Division     Revised February 21, 2011
©  Copyright  2005 - 2011         All Rights Reserved
        NorKraine Resources Division